Used Teknion Cubicles When Your Office Moves: Reuse, Reconfigure and Add Stations in the GTA (2026)
Moving offices is expensive enough without replacing furniture that still works. If your current workstations are Teknion — or if you are moving into an empty floor and starting fresh — used Teknion cubicles give you three options most furniture cannot: reuse what you have, reconfigure it for the new floor plan, and add matching stations where the new space needs more seats. Ufficio Furniture helps GTA businesses do exactly that from our Mississauga showroom at 1215 Meyerside Drive Unit 7, Mississauga ON. Browse the range at https://www.ufficiofurniture.com and see current systems at https://www.ufficiofurniture.com/office-cubicles, or call 647-885-8642 to talk through your move.
Why panel systems travel better than loose desks
A Teknion workstation is a kit of panels, work surfaces, overhead cabinets and pedestals, not a single welded desk. That matters on moving day. Panels unbolt, surfaces lift off, and the same parts reassemble in a different shape at the new address. A run of straight stations can become corner stations. A quad can split into two pairs. Power and data run inside the panels, so your electrician is reconnecting a system, not inventing one.
Loose desks, by contrast, fit the old room because they were bought for it. In a new room with different columns, windows and door swings, they often leave gaps, block walkways, or simply do not fill the floor evenly. Panel systems were designed for exactly this problem, which is one reason Teknion cubicles hold their value on the used market across Toronto and the GTA.
Step one: count what the new floor actually needs
Before pricing anything, count seats in the new space — not the old one. Moves usually change the number: a team grows, a department goes hybrid, or two small offices consolidate into one. Measure the new floor, note where power and data land, and decide panel height by job type. Taller panels suit focused and confidential work; lower panels suit collaborative teams who talk across stations.
At Ufficio, a proven starting point is the Teknion Leverage Workstation System at $650 CAD per station, with 500 in stock — enough matching inventory to fill a large new floor in one consistent system instead of patching together whatever is available. A larger Teknion Leverage configuration, 6 by 7 feet, is $700 CAD per station. Because the stock is deep, you can also add matching stations months later when a new hire starts, rather than over-buying on moving day.
Step two: decide what to reuse, reconfigure or replace
Not every station should make the trip. During a move, inspect each component honestly. Panels with sound frames and clean fabric are worth moving. Work surfaces with chipped edges at the new, more visible office may not be. Pedestals with sticking drawers cost more to move than to replace from used stock.
Reconfiguration is where used Teknion cubicles save the most money. The panels and surfaces you already own become the core of the new layout, and you buy only the added stations, end panels, or storage pieces the new plan requires. That blended approach — existing parts plus matching used additions — routinely costs a fraction of an all-new installation, and it avoids the long lead times that can leave a new office sitting empty after the lease starts.
What the move itself looks like
A typical GTA project runs in phases. First, a layout for the new floor, station by station. Second, delivery and installation scheduled around your move date, including weekends where needed so staff lose as few workdays as possible. Third, a walkthrough at the new site: panels level, power live at every station, drawers and overhead cabinets working, and any missing trim pieces noted and fixed.
Delivery, installation and taxes are quoted separately for each project, based on the number of stations, the building's loading and elevator rules, and the distance involved. Share those details when you call 647-885-8642 and the quote you get back will reflect your actual move, not a generic estimate.
Plan your move around the furniture, not after it
The most common mistake is signing a lease, booking movers, and only then asking whether the workstations fit. Ask earlier. Bring your new floor plan to Ufficio Furniture, 1215 Meyerside Drive Unit 7, Mississauga ON — we are open Mon–Sat 10am–7pm and Sun 11am–6pm — and we will help you count stations, choose panel heights, and price the reuse, reconfigure and add options side by side in CAD. Start online at https://www.ufficiofurniture.com, check https://www.ufficiofurniture.com/office-cubicles for current Teknion systems, and call 647-885-8642 before your move date is locked in.





Comments